Back to the XGIMI system

Pick your projector. The page shows its XGIMI firmware versions, the official file for each of them and the steps for exactly that model.

You only tried Lumen OS

Just restart the projector. The trial does not change the XGIMI system, it comes back by itself after a restart. Nothing to download.

Lumen OS is installed for good

An XGIMI recovery USB stick with the official XGIMI file for your model and version brings it back. It erases everything on the projector.

XGIMI Play 6

Lumen OS goes onto the Play 6 from a computer, and the same recovery USB stick brings the XGIMI system back. Take the file that fits your Wi-Fi chip.

Pick your projector

Lumen Installer shows the model code at the top of its screen. Newer Lumen OS versions show it in Settings > Device Preferences > About.

XGIMI Z9X G0082

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V6.15.62Installs for good

After an install: the recovery stick with the file below. During the trial: a restart.

Download V6.15.62
Official XGIMI file
XGIMI_HORSEPOPULAR_XR03D.bin
Size
2,656,047,920 bytes
XGIMI build
MD5
8e6e0f913bda23a999c620b5f219026b
SHA-256
d273b450923918ec5e8635012d79cea39994dd94a2db86d7daa26293b25c9a15
V6.15.58Installs for good

After an install: the recovery stick with the file below. During the trial: a restart.

Download V6.15.62
Official XGIMI file
XGIMI_HORSEPOPULAR_XR03D.bin
Size
2,656,047,920 bytes
XGIMI build
MD5
8e6e0f913bda23a999c620b5f219026b
SHA-256
d273b450923918ec5e8635012d79cea39994dd94a2db86d7daa26293b25c9a15

XGIMI did not publish a file for this version. The newer V6.15.62 of the same line fits.

V6.15.19Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V6.15.19
Official XGIMI file
XGIMI_HORSEPOPULAR_XR03D.bin
Size
2,589,266,736 bytes
XGIMI build
MD5
9de6ea388187a0a5b5e7e19cf71e83d3
SHA-256
61f729e92fd55f38218d379869892ded098e1e70f336a8c625df142fea6447e8

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

Recovery USB stick for the XGIMI Z9X

You need a USB stick, a computer and the file for your version. The restore erases everything on the projector: apps, accounts, files and settings.

  1. Download the file

    Download the official XGIMI file for the version the projector had before Lumen OS, from the list above. Check the size to the byte and the MD5, as shown further down. Keep the name XGIMI_HORSEPOPULAR_XR03D.bin exactly, without a (1) at the end.

  2. Prepare the stick

    Format the stick as FAT32 with the MBR scheme. A stick of 32 GB or less is the easiest. On a Mac: Disk Utility, View, Show All Devices, select the stick itself, Erase, format MS-DOS (FAT), scheme Master Boot Record. On Windows: File Explorer, right click the stick, Format, file system FAT32.

  3. Put two files on it

    Put only two files on the stick: XGIMI_HORSEPOPULAR_XR03D.bin with exactly this name and an empty file factory.txt. On Windows first turn on file name extensions in File Explorer, else you get factory.txt.txt. On a Mac copy in the Terminal, because Finder adds hidden files: cp -X ~/Downloads/XGIMI_HORSEPOPULAR_XR03D.bin /Volumes/STICK/ and touch /Volumes/STICK/factory.txt.

  4. Plug in the stick

    Put the stick into the projector USB 2.0 port. Unplug the power cable.

  5. Start the restore

    Hold the power button on the projector, plug the power cable in and keep holding for 6 to 7 seconds.

  6. Wait about 4 minutes

    Do not cut the power. If the power does go off, leave the stick in and switch the projector on again. Then the XGIMI system starts as it came from the factory.

  7. Remove factory.txt

    Take the stick out and delete factory.txt from it, so it does not restore again by accident.

XGIMI Z9X HB G0130

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V6.17.12Installs for good

After an install: the recovery stick with the file below. During the trial: a restart.

Download V6.17.12
Official XGIMI file
XGIMI_GOATELEGANT_XR03D.bin
Size
2,178,814,576 bytes
XGIMI build
MD5
a5c3129065e1122f229df2d77b218d95
SHA-256
e251ec0b55295e5c9152ff89b9471d4e120bc1ba4494e5f51e727d03f540513a
V6.16.24Installs for good

After an install: the recovery stick with the file below. During the trial: a restart.

Download V6.16.24
Official XGIMI file
XGIMI_GOATELEGANT_XR03D.bin
Size
2,160,464,496 bytes
XGIMI build
MD5
b7eae2c74341a4e0b62764a4093dd8c7
SHA-256
d5b01092958f61dfa4bc8f090b72b4d1fd054391a7d2b4e4fd5ec37b17747604

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

Recovery USB stick for the XGIMI Z9X HB

You need a USB stick, a computer and the file for your version. The restore erases everything on the projector: apps, accounts, files and settings.

  1. Download the file

    Download the official XGIMI file for the version the projector had before Lumen OS, from the list above. Check the size to the byte and the MD5, as shown further down. Keep the name XGIMI_GOATELEGANT_XR03D.bin exactly, without a (1) at the end.

  2. Prepare the stick

    Format the stick as FAT32 with the MBR scheme. A stick of 32 GB or less is the easiest. On a Mac: Disk Utility, View, Show All Devices, select the stick itself, Erase, format MS-DOS (FAT), scheme Master Boot Record. On Windows: File Explorer, right click the stick, Format, file system FAT32.

  3. Put two files on it

    Put only two files on the stick: XGIMI_GOATELEGANT_XR03D.bin with exactly this name and an empty file factory.txt. On Windows first turn on file name extensions in File Explorer, else you get factory.txt.txt. On a Mac copy in the Terminal, because Finder adds hidden files: cp -X ~/Downloads/XGIMI_GOATELEGANT_XR03D.bin /Volumes/STICK/ and touch /Volumes/STICK/factory.txt.

  4. Plug in the stick

    Put the stick into a USB port of the projector. Unplug the power cable.

  5. Start the restore

    Hold the power button on the projector, plug the power cable in and keep holding for 6 to 7 seconds. If nothing happens, try another USB port.

  6. Wait a few minutes

    Do not cut the power. If the power does go off, leave the stick in and switch the projector on again. Then the XGIMI system starts as it came from the factory.

  7. Remove factory.txt

    Take the stick out and delete factory.txt from it, so it does not restore again by accident.

XGIMI Z9X HB G0148

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V6.17.12Installs for good

After an install: the recovery stick with the file below. During the trial: a restart.

Download V6.17.12
Official XGIMI file
XGIMI_GOATELEGANT_XR03D.bin
Size
2,178,814,576 bytes
XGIMI build
MD5
a5c3129065e1122f229df2d77b218d95
SHA-256
e251ec0b55295e5c9152ff89b9471d4e120bc1ba4494e5f51e727d03f540513a
V6.16.24Not for this model

This XGIMI firmware is made for other models, Lumen OS does not go onto it. First put back this model's own XGIMI firmware with the recovery stick and the file above.

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

Recovery USB stick for the XGIMI Z9X HB

You need a USB stick, a computer and the file for your version. The restore erases everything on the projector: apps, accounts, files and settings.

  1. Download the file

    Download the official XGIMI file for the version the projector had before Lumen OS, from the list above. Check the size to the byte and the MD5, as shown further down. Keep the name XGIMI_GOATELEGANT_XR03D.bin exactly, without a (1) at the end.

  2. Prepare the stick

    Format the stick as FAT32 with the MBR scheme. A stick of 32 GB or less is the easiest. On a Mac: Disk Utility, View, Show All Devices, select the stick itself, Erase, format MS-DOS (FAT), scheme Master Boot Record. On Windows: File Explorer, right click the stick, Format, file system FAT32.

  3. Put two files on it

    Put only two files on the stick: XGIMI_GOATELEGANT_XR03D.bin with exactly this name and an empty file factory.txt. On Windows first turn on file name extensions in File Explorer, else you get factory.txt.txt. On a Mac copy in the Terminal, because Finder adds hidden files: cp -X ~/Downloads/XGIMI_GOATELEGANT_XR03D.bin /Volumes/STICK/ and touch /Volumes/STICK/factory.txt.

  4. Plug in the stick

    Put the stick into a USB port of the projector. Unplug the power cable.

  5. Start the restore

    Hold the power button on the projector, plug the power cable in and keep holding for 6 to 7 seconds. If nothing happens, try another USB port.

  6. Wait a few minutes

    Do not cut the power. If the power does go off, leave the stick in and switch the projector on again. Then the XGIMI system starts as it came from the factory.

  7. Remove factory.txt

    Take the stick out and delete factory.txt from it, so it does not restore again by accident.

XGIMI X50 Ultra G0111

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V1.3.38Installs for good

After an install: the recovery stick with the file below. During the trial: a restart.

Download V1.3.38
Official XGIMI file
XGIMI_HORSEPOPULAR_XR04E.bin
Size
2,867,991,104 bytes
XGIMI build
MD5
324755b23785ca2d49e8c4efcfe66a7a
SHA-256
2ef2141bcd5c705f7097db78cd0ed674a28412d1a329a1f70595bc86f16c6963
V1.2.64Installs for good

After an install: the recovery stick with the file below. During the trial: a restart.

Download V1.2.64
Official XGIMI file
XGIMI_HORSEPOPULAR_XR04E.bin
Size
2,693,993,312 bytes
XGIMI build
MD5
636b259ddefeeefa35cd5dd887e63bcd
SHA-256
c06adf37d67b0cb7839405138c78061f46f3a01b8620440f14f63e578ae1f1e0
V1.2.54Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V1.2.54
Official XGIMI file
XGIMI_HORSEPOPULAR_XR04E.bin
Size
2,693,731,168 bytes
XGIMI build
MD5
0475c751698f3313d49d1159d59e210e
SHA-256
5f9c2c1e2fb4093dced9296bcdee662e6e900b78808dc2e16c18f3928e0c788f

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

Recovery USB stick for the XGIMI X50 Ultra

You need a USB stick, a computer and the file for your version. The restore erases everything on the projector: apps, accounts, files and settings.

  1. Download the file

    Download the official XGIMI file for the version the projector had before Lumen OS, from the list above. Check the size to the byte and the MD5, as shown further down. Keep the name XGIMI_HORSEPOPULAR_XR04E.bin exactly, without a (1) at the end.

  2. Prepare the stick

    Format the stick as FAT32 with the MBR scheme. A stick of 32 GB or less is the easiest. On a Mac: Disk Utility, View, Show All Devices, select the stick itself, Erase, format MS-DOS (FAT), scheme Master Boot Record. On Windows: File Explorer, right click the stick, Format, file system FAT32.

  3. Put the file on it

    Put only the file XGIMI_HORSEPOPULAR_XR04E.bin on the stick, with exactly this name. On a Mac copy it in the Terminal, because Finder adds hidden files: cp -X ~/Downloads/XGIMI_HORSEPOPULAR_XR04E.bin /Volumes/STICK/.

  4. Plug in the stick

    Put the stick into the projector. Unplug the power cable.

  5. Start the restore

    Hold the power button on the projector itself, plug the power cable in and keep holding until the update screen shows, about 5 seconds.

  6. Wait for the update to finish

    Do not cut the power while it updates. Everything on the projector is erased, then the XGIMI system starts.

XGIMI X50 Ultra Max G0100

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V1.3.38Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V1.3.38
Official XGIMI file
XGIMI_HORSEPOPULAR_XR03E.bin
Size
2,867,991,104 bytes
XGIMI build
MD5
324755b23785ca2d49e8c4efcfe66a7a
SHA-256
2ef2141bcd5c705f7097db78cd0ed674a28412d1a329a1f70595bc86f16c6963
V1.2.64Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V1.2.64
Official XGIMI file
XGIMI_HORSEPOPULAR_XR03E.bin
Size
2,693,993,312 bytes
XGIMI build
MD5
636b259ddefeeefa35cd5dd887e63bcd
SHA-256
c06adf37d67b0cb7839405138c78061f46f3a01b8620440f14f63e578ae1f1e0
V1.2.54Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V1.2.54
Official XGIMI file
XGIMI_HORSEPOPULAR_XR03E.bin
Size
2,693,731,168 bytes
XGIMI build
MD5
0475c751698f3313d49d1159d59e210e
SHA-256
5f9c2c1e2fb4093dced9296bcdee662e6e900b78808dc2e16c18f3928e0c788f

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

XGIMI RS30 Ultra Max G0155

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V1.1.42Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Our list has no official XGIMI file for this model yet. Lumen OS runs on it only as a trial, so a restart is all you need to go back.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

XGIMI RS30 Ultra G0170

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V1.2.5Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V1.2.5
Official XGIMI file
XGIMI_HORSEPOPULAR_XR07C.bin
Size
2,414,220,032 bytes
XGIMI build
MD5
2c3ae536f71791b292239ec2e2008ade
SHA-256
dac27e2f0cabc367cd7a1082837ee3316d8ccb9c38133d0abc22e8bf83a56e46

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

XGIMI TITAN Noir H0061

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V1.2.99Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V1.2.99
Official XGIMI file
XGIMI_HORSEPOPULAR_XR06EOS.bin
Size
2,519,405,360 bytes
XGIMI build
MD5
c7f8f1a7200860b63aa7c61131bc4207
SHA-256
0863e1496203ca346611e58f03b1659dae5598afedb754786ba0973b42cea4fc
V1.2.54Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

XGIMI TITAN Noir Pro H0062

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V1.2.99Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V1.2.99
Official XGIMI file
XGIMI_HORSEPOPULAR_XR04EOS.bin
Size
2,519,405,360 bytes
XGIMI build
MD5
c7f8f1a7200860b63aa7c61131bc4207
SHA-256
0863e1496203ca346611e58f03b1659dae5598afedb754786ba0973b42cea4fc
V1.2.54Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

XGIMI TITAN Noir Max H0063

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V1.2.99Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Download V1.2.99
Official XGIMI file
XGIMI_HORSEPOPULAR_XR03EOS.bin
Size
2,519,405,360 bytes
XGIMI build
MD5
c7f8f1a7200860b63aa7c61131bc4207
SHA-256
0863e1496203ca346611e58f03b1659dae5598afedb754786ba0973b42cea4fc
V1.2.54Trial only

Restart the projector. No stick needed: on this version Lumen OS runs only as a trial.

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

If Lumen OS only runs as a trial

Restart the projector. It starts the XGIMI system with your apps and files. To free the space the trial took, open Lumen Installer and press Remove the trial.

XGIMI Play 6 G0058

XGIMI firmware versions

Find the version the projector had before Lumen OS.

V1.8.127Installs from a computer

The recovery stick with the file below.

Download V1.8.127
Official XGIMI file
XGIMI_DRAGONHEALTHY_XN03C.bin
Size
2,115,834,528 bytes
XGIMI build
MD5
a14277a6c73676487a7de5ede36dc017
SHA-256
7aa17561fcd86e37788d8265da3a40c397f4d2327ea2af7943b33a35ecf141fa
V1.7.116Installs from a computer

The recovery stick with the file below.

Download V1.7.116
Official XGIMI file
XGIMI_DRAGONHEALTHY_XN03C.bin
Size
2,051,543,712 bytes
XGIMI build
MD5
55ae66ed7e14a20759ea4b9d5686d591
SHA-256
58a48965e18d6f2d4c79a558873cfebfa4c8530727d5dc04eea90c58698c97a8

Your version is not listed? Do not take a file of another version, the projector may refuse it. Write to us and we will find the right file.

Recovery USB stick for the XGIMI Play 6

You need a USB stick, a computer and the file for your version. The restore erases everything on the projector: apps, accounts, files and settings.

  1. Download the file

    Download the official XGIMI file for the version the projector had before Lumen OS, from the list above. Check the size to the byte and the MD5, as shown further down. Keep the name XGIMI_DRAGONHEALTHY_XN03C.bin exactly, without a (1) at the end.

  2. Prepare the stick

    Format the stick as FAT32 with the MBR scheme. A stick of 32 GB or less is the easiest. On a Mac: Disk Utility, View, Show All Devices, select the stick itself, Erase, format MS-DOS (FAT), scheme Master Boot Record. On Windows: File Explorer, right click the stick, Format, file system FAT32.

  3. Put two files on it

    Put only two files on the stick: XGIMI_DRAGONHEALTHY_XN03C.bin with exactly this name and an empty file factory.txt. On Windows first turn on file name extensions in File Explorer, else you get factory.txt.txt. On a Mac copy in the Terminal, because Finder adds hidden files: cp -X ~/Downloads/XGIMI_DRAGONHEALTHY_XN03C.bin /Volumes/STICK/ and touch /Volumes/STICK/factory.txt.

  4. Check the stick

    If you have the Lumen OS computer installer, let it check the stick. It only reads it and names the projector Wi-Fi chip: bash lumen-install.sh stick /Volumes/STICK.

  5. Plug in the stick

    Pull the A-to-A cable. Put the stick into the projector USB port. Switch the projector off and unplug the power cable.

  6. Start the restore

    Hold the power button on the projector, plug the power cable in and keep holding for about 5 seconds. The screen shows 正在检测加载更新包 (looking for the update), then 系统更新中,请勿断开电源,预计4分钟 (updating, about 4 minutes).

  7. Wait about 4 minutes

    Do not cut the power. If it does go off, repeat the two steps before with the same stick. Then the XGIMI system starts as it came from the factory.

  8. Remove factory.txt

    Take the stick out and delete factory.txt from it, so it does not restore again by accident.

Play 6 specifics

  • V1.8.127 is for a Play 6 with the AIC Wi-Fi chip or an XHF serial number, and for any Play 6 that ran V1.8.x.
  • V1.7.116 is only for a Play 6 with the MediaTek Wi-Fi chip that came with V1.7.116 or lower. Never put V1.7.116 on a unit with the AIC chip or on one that ran V1.8.x.
  • During the restore only the stick sits in the USB port: no A-to-A cable, network adapter or hub.
  • To install Lumen OS again later, first run bash lumen-install.sh --device play6 reset. It makes the installer forget the last install.

Important

  • Only the file of the version the projector had before Lumen OS. The projector may refuse an older version: XGIMI compares build dates. Take a newer one only when the list names it for your version.
  • Only the file of your model, with the exact name from the list. Files of different models have similar names and are easy to mix up.
  • Your version is not listed? Do not take a file of another version. Write to us and we will find the right one.
  • Keep the projector plugged in. Never pull the cable while the restore runs.
  • The restore erases everything on the projector. Save what you need first.
  • Take the file only from the links on this page, XGIMI's own server, and never unpack it. The stick works only with the official file as it is.

How to check the file

The size must match to the byte and the MD5 or SHA-256 must match the value in the list.

SystemMD5SHA-256
Macmd5 FILEshasum -a 256 FILE
Linuxmd5sum FILEsha256sum FILE
Windowscertutil -hashfile FILE MD5certutil -hashfile FILE SHA256

Is there a way back inside Lumen OS

No. Neither Lumen OS nor Lumen Installer has a button that brings the XGIMI system back after an install. Only the recovery stick does that. Newer Lumen OS versions have a hint in Settings > Device Preferences > About > Back to the XGIMI system: the model, the XGIMI firmware, the exact file name for the stick and, when our list has the file, its version, size and a QR code.

Questions

Will I lose my data?

The trial erases nothing. The recovery stick erases everything on the projector: apps, accounts, files and settings.

Can I install Lumen OS again later?

Yes. After going back the projector is as it came from the factory, and Lumen Installer offers the trial again. On the Play 6 first run bash lumen-install.sh --device play6 reset.

The projector ignores the stick. What to check?

The stick is FAT32 with the MBR scheme, only the needed files are on it, the file name matches letter for letter. Hold the power button while you plug the cable in. The Z9X needs its USB 2.0 port, on the Z9X HB try another port.

What if the power goes off?

Leave the stick in the projector and start the restore again, as in the steps for your model.

Lumen OS does not start after the install. Do I need the stick?

Not yet. Unplug the projector, plug it in again and switch it on with a short press. On the Z9X, Z9X HB and X50 Ultra the projector goes back to the XGIMI system by itself after a few failed starts. If that does not help, write to us.

Can I use a newer XGIMI file than I had?

Only when the list names it for your version. Otherwise take exactly the version the projector had before Lumen OS.

Data from the signed Lumen Installer list, issue 1795298703, checked 22 November 2026. Lumen Installer and Lumen OS read the same list. Every link is checked when this page is built, every file was downloaded in full for its MD5 and SHA-256. The files sit on XGIMI's server, we never change or keep them.

How it works, step by step Projectors